CTI IS 1000 Products

  • CTI: IS-1000

    Details
    ID#:
    9007968
    Category:
    Pumps
    Cryo compressor | AMAT: 3620-00317 | CTI Helix: 8135921G001 | External Cooling: Water Cooled | Power Requirements: 200-230 V, 50/60 Hz, 3 Phase | Weight: 262 lb.
  • CTI: IS-1000 LV

    Details
    ID#:
    9047727
    Category:
    Pumps
    Compressors.
  • CTI: IS-1000

    Details
    ID#:
    79987
    Category:
    Pumps
    Compressors, Part No.: 8135929G001U.
  • CTI: IS-8F

    Details
    ID#:
    9061953
    Category:
    Pumps
    Compressors | P/N: 8185037G002.
  • THERMOTRON: SE 1000-5-5

    Details
    ID#:
    125683
    Category:
    Environmental Chamb...
    Vintage:
    2004 
    Environmental chamber, temp only | Can be upgraded to humidity control at an additional cost | Heated multi-paned window | Castors wheel | (2) 5HP Refrigeration system | Compressors: (2) 5 horsepower rated compressors | Chamber heater: Approximately 8 kW | Airflow: Approximately 1000 CFM (28 cubic meters/minute) rated | Circulator motor: Approximately ½ horsepower | | Air Performance: | With no static or dynamic load | 185°F to -40°F (85°C to -40°C): 33 minutes | | With no static or dynamic load | -40°F to 185°F (-40°C to 85°C): 23 minutes | | Live Load Capacity: | 32°F (0°C): 3000 watts | -65.2°F (-54°C): 2000 watts | | Temperature control: ±0.5°F (±0.3°C) Dry bulb temperatures from control point after stabilization at the control sensor | Temperature uniformity: ±0.9°F (±0.5°C) This is a standard deviation from the mean, measured at -13°F (-25°C) and 212°F (100°C) | | Temperature range: -94°F to 356°F (-70°C to 180°C) | Electrical: 400/3/50, 33A | Voltage ±5% (power supply must be hard wired in) | Internal test space: 800Wx800Dx950mmH | Workspace dimensions: 40” W X 39.25” D X 38.25” H | Run time: Less than 1000 hours | | Includes: | Painted Thermotron Blue or Grey | Input Power: 400/3/50 | Full opening hinged access door | Multi-pane heated window assembly in the door | (1) x 8-10 cm diameter access port located in the right hand side wall | (1) Adjustable Interior Stainless Steel Shelf | Casters/leveling pads | Air-cooled Cascade Refrigeration System | Main power electrical disconnect switch | Nichrome Heating elements | Interior Light | 7800 controller | Thermalarm | | 2004 vintage.
  • CTI: P/N 812401G001

    Details
    ID#:
    9036767
    Category:
    Spare Parts
    Motor controllers, 3ph | For CTI compressors.
  • CTI: Cryogenics Cryo-torr 7

    Details
    ID#:
    179211
    Category:
    Pumps
    Cryopump | 8" conflat flange | Cryopump only, no cables or compressor | Pumping Speed: | Water: 3600 liters/sec | Air: 1000 liters/sec.
  • CTI: Spare part

    Details
    ID#:
    9043147
    Category:
    Spare Parts
    10" ASA flange | For CTI Cryotorr 8 | Cold head only.
  • CTI: 8080300K001

    Details
    ID#:
    78178
    Category:
    Pumps
    Absorbers, for CTI 9600/9700A compressors.
  • CTI: 8200

    Details
    ID#:
    9008424
    Category:
    Pumps
    Water cooled compressor | 208-220 V, 1 phase | During helium charge, helium gauge is cloudy, but fill point indicator 250 psi is visible.
  • CTI: 8510

    Details
    ID#:
    137044
    Category:
    Pumps
    Cryo compressor for On-Board cryopumps | Can drive up to (3) CTI On-Board 8, (1) CTI On-Board 10, (1) On-Board 400 P/N 8031315 | Power requirements: 208VAC, 3-phase, 50/60Hz.
  • CTI: 8510

    Details
    ID#:
    137046
    Category:
    Pumps
    Cryo compressor for On-Board cryopumps | Can drive up to (3) CTI On-Board 8, (1) CTI On-Board 10, (1) On-Board 400 P/N 8031315 | Power requirements: 208VAC, 3-phase, 50/60Hz.
  • CTI: Cryotorr 8 (On-Board)

    Details
    ID#:
    137093
    Category:
    Pumps
    Cryopump | P/N 8112854 | ASA flange, 6" | Roughing valve | Purge valve | Heater | Keypad | TC | Network module.
  • CTI: Cryotorr 8 (On-Board)

    Details
    ID#:
    137100
    Category:
    Pumps
    Cryopump | P/N 8112855NW200 ISO flange | ROughing valve | Purge valve | TC | Network connection.
  • CTI: Cryotorr 8 (On-Board)

    Details
    ID#:
    137103
    Category:
    Pumps
    Cryopump | P/N 8112854 | ANSI flange | Roughing valve | Purge valve | TC | Heater.
  • CTI: SC

    Details
    ID#:
    165252
    Category:
    Pumps
    Cryo compressor & Cold Head Control Box 8043-001G001- Primary: 208/230 volt, 60 Hz / Secondary: 200 Volt, 50 Hz | - Capacity (pump models): 1 Cryo-Torr (100, 7, 8, 8F) | Cooling type: Air | Controller type: | - Cold Head Control Box, P/N: 8043-001G001 | Includes users manual.
  • CTI: Cryotorr 8

    Details
    ID#:
    137050
    Category:
    Pumps
    Cryopump | ASA flange, 6" | Conflat or ISO flange also available | Temperature display with cable (optional).
  • CTI: Cryotorr 10 / 9600

    Details
    ID#:
    83113
    Category:
    Pumps
    Cryopump | P/N 8018275 | Conflat ultra high vacuum flange with copper seal | Purge valve | Roughing valve.
  • CTI: 8F (On-Board) Cryo-Torr

    Details
    ID#:
    137106
    Category:
    Pumps
    Cryopumps | Configured for APPLIED MATERIALS Endura HP PVD system | Fast Regen control cryopump with roughing valve and diode temp sensor | Network interface.
  • CTI: 8F (On-Board)

    Details
    ID#:
    144632
    Category:
    Pumps
    Cryopump | Part No.: 8116005G004 | Includes: | Valves | Sensors | Fittings | Currently stored in a warehouse since 2002.
Copyright © 2011 Capital Asset Exchange & Trading LLC. All rights reserved.