FUJI CP6 Products

  • FUJI: CP6 / CP7

    Details
    ID#:
    170689
    Category:
    Pc Board Assembly A...
    Lot of Parts for CP6 / CP7 chip shooters: | (11) FUJI CP6 NOZZLE 1.8MM/12MM ROUND AWPH9550 | (11) FUJI CP6 NOZZLE.2.5MM/20MM ROUND AWPH9580 | (2) FUJI CP & QP PULLEY ADBPP8010 | (2) FUJI CP 6 CAM BOX TIMING BELT H4519W | (2) FUJI CP 6 CAM BOX TIMING BELT WPA5100 | (2) FUJI CP 6 NOISE REDUCTION BOX DRIVE BELT H4453H | (2) FUJI CP 6 STATION 6 UV LAMP R1016A | (2) FUJI CP 6 STATIONS 10 & 12 TIMING BELT H4521K | (2) FUJI CP 7 Needle Bearing H4395A | (2) FUJI CP 7 Thrust Bearing H4297F | (2) FUJI CP 7 Thrust Bearing H4301F | (21) FUJI CP6 NOZZLE 5MM/22MM SQUARE AWPH9660 | (3) FUJI CP STATIONARY CUTTER WPK0240  | (3) FUJI CP6 CAM BOX TIMING BELT WPA5090 | (30) FUJI CP6 NOZZLE 1.3MM/12MM ROUND AWPH9530 | (45) FUJI NOZZLE 3.7MM (16MM) CP6 AWPH9572 | (58) FUJI SEAL 3.7MM (20MM) CP6 WPH8121 | (6) FUJI CP6 NOZZLE 3.75MM/20MM ROUND AWPH9600 | (75) FUJI CP6 NOZZLE 0.7MM/12MM ROUND AWPH-9510 | (9) FUJI CP7 Washer W1066A.
  • FUJI: CP6 / CP7

    Details
    ID#:
    142626
    Category:
    Pc Board Assembly A...
    Feeders: | (100) CP7 8x2mm paper feeder | (30) CP7 8x2mm embossed feeder | (150) CP7 8x4mm paper feeder | (100) CP7 8x4mm embossed feeder | (200) CP6 8x2mm paper feeder | (20) CP6 8x2mm embossed feeder | (80) CP6 8x4mm paper feeder | (100) CP6 8x4mm embossed feeder | (300) CP6 feeder reel holder | (200) CP6/CP7 12x4mm/12x8mm/12x12mm feeder | (100) CP6/CP7 16x4mm/16x8mm/16x12mm feeder | (40) CP6/CP7 24mm feeder | (60) CP6/CP7 32x8mm/32x12mm.32x16mm/32x24mm feeder.
  • FUJI: CP6 / CP7

    Details
    ID#:
    142627
    Category:
    Pc Board Assembly A...
    Feeders: | (Qty 40) CP6 8x2mm paper feeder | (Qty 10) CP6 8x2mm embossed feeder | (Qty 60) CP7 8x4mm embossed feeder.
  • FUJI: CP6

    Details
    ID#:
    161300
    Category:
    Pc Board Assembly A...
    Feeders: | Fuji CP6 8x4- 13" reels | Fuji Cp6 8x2 - 7" reels | 12mm | All other larger sizes.
  • FUJI: IP3 / CP6

    Details
    ID#:
    9003640
    Category:
    Spare Parts
    Gates.
  • FUJI: CP6

    Details
    ID#:
    9002531
    Category:
    Pc Board Assembly A...
    Lot of feeders: | 8 x 4 (Qty 187) | 8 x 2 (Qty 4).
  • FUJI: IP3 / CP6

    Details
    ID#:
    9003639
    Category:
    Spare Parts
    Feeder carts.
  • FUJI: CP6

    Details
    ID#:
    9061982
    Category:
    Pc Board Assembly A...
    Chip shooters.
  • FUJI: CP6 4000

    Details
    ID#:
    9032233
    Category:
    Pc Board Assembly A...
    Chip shooter | (2) Nozzles.
  • FUJI: CP6 E / CP6

    Details
    ID#:
    165993
    Category:
    Pc Board Assembly A...
    Vintage:
    1995-1996 
    Chip shooters | (200) 8mm feeders | Installed | 1995-1996 vintage.
  • FUJI: NXT

    Details
    ID#:
    149676
    Category:
    Pc Board Assembly A...
    Modules: | (Qty 4) M3II and (4) MBC (Independent Single conveyor) with (4) H12V heads | (Qty 1) XPF with MTU | (Qty 90) Feeders | (Qty 4) M3II with XPF (2010 vintage, PCB flow L-->R) Specifications: Machine Base : Independent 4MII base (with Vacuum pump/with CPU board) | NXTII M/C version V5.17 | XPF version V3.12 | Module Type - Main Conveyor (without auto PCB support pin) | M3II Module Single conveyor | include: Feeder pallet with bucket type reel holder, | Waste Tape Cutter Unit, Reject Parts Box, | Feeder Pallet Cover, Tape Duct. | Backup plate for PCB ; Backup pin (8 pcs) | | M3II Module Single conveyor | include: Feeder pallet with bucket type reel holder, | Waste Tape Cutter Unit, Reject Parts Box, | Feeder Pallet Cover, Tape Duct. | Backup plate for PCB ; Backup pin (8 pcs) | | Side Cover | Side Cover with Window (Left) | Side Cover with Window (Right) | | Placing Head | V12 Placing Head (without the chuck for auto PCB support pin) | Placement rate of 26,000cph (only used in M3II) | | Nozzle Station | H08/H12HS/V12 Nozzle Station (M3II / M6II 32 sockets) ND36A | Nozzle Jig | Nozzle Jig for V12 placing angle adjustment( Need 12 nozzle jigs for one V12 ) | Jig nozzle for Hybrid calibration for H08/H12HS/V12 dia. 1.3 | | Nozzle Kit | Nozzle Kit for V12 (including 12 nozzles) | | Accessories | Reel Set Stand | Nozzle cleaning tool | Wast Tape Box | | Connection Cable (before/after NXTII&XPF ) | SMEMA Cable (1.5m) | | FUJI XPF | High-Speed Multi-Purpose Mounter FUJI XPF-L [Fixed/Clamp] | ( incl. Waste tape cutter,4pcs of Back up Pin, 1pc of Eathernet cable) (PCB flow: L-->R) | | Device Options | MTU-AII | Tray Remover(required for Tray Unit) | Tray height measurment Auto-tool,required for tray Unit | Bucket Type Reel Holder for MTU-AII (including 10sets of Divider) | Bucket type reel holder for Fixed Device with (20) sets of Divider Common Options | Revolver Auto-Tool,not including nozzles | Nozzle Kit for Revolver Auto-Tool (12 Nozzles) | Single Nozzle Kit (3 Nozzles) | | Feeders | Intelligent Feeder without reel holder, with roller | W08c.
  • FUJI: CP 6 Series

    Details
    ID#:
    45771
    Category:
    Pc Board Assembly A...
    Feeders - Many available, calibrated: | 5 Fuji CP 6, 7, XP Set-Up Jigs | 4 Bliss CP 6, 7, XP Feeder Storage Racks | 83 8X2 CP 6 Feeder, Paper, 0.7mm, 7" Reel | 3 8X2 CP 6 Feeder, Embossed, 1.0mm, 7" Reel | 109 8x4 CP 6 Feeder, Paper, 1.0mm, 13" Reel | 100 8x4 CP 6 Feeder, Embossed, 1.3mm, 13" Reel | 6 12x4 CP 6 Feeder, Embossed, 2.5mm, 7" Reel | 28 12x8 CP 6 Feeder, Embossed, 2.5mm, 7" Reel | 33 12x4 CP 6 Feeder, Embossed, 2.5mm, 13" Reel | 56 12x8 CP 6 Feeder, Embossed, 2.5mm, 13" Reel | 12 12x12 CP 6 Feeder, Embossed, 2.5mm, 13" Reel | 1 16x4 CP 6 Feeder, Embossed, 3.7mm, 13" Reel | 48 16x8 CP 6 Feeder, Embossed, 3.7mm, 13" Reel | 83 16x12 CP 6 Feeder, Embossed, 3.7mm, 13" Reel | 4 24x4 CP 6 Feeder, Embossed, 5.0mm, 13" Reel.
  • FUJI: H08

    Details
    ID#:
    9063811
    Category:
    Spare Parts
    Heads | For Fuji NXT.
  • FUJI: H12HS

    Details
    ID#:
    9063810
    Category:
    Spare Parts
    Heads | For Fuji NXT.
  • FUJI: QP 132 / NP 153

    Details
    ID#:
    9003328
    Category:
    Pc Board Assembly A...
    Lot of Feeders: | | (8) FUJI QP132/NP153 16mm Multi-pitch | (1) FUJI QP132/NP153 12mm Multi-pitch | (8) FUJI QP132/NP153 8X4MM double Multi-pitch feeder | (144) FUJI QP132/NP153 8X2 MM double Multi-pitch feeder.
  • FUJI: CP 6

    Details
    ID#:
    9025850
    Category:
    Spare Parts
    Lot of (104) feeders and (3) carts: | | (24) 8x4 – part number: WD-0804 | (23) 12x8 – part number: WE-1208 | (8) 12x4 – part number: WD-1204 | (18) 8x4 – part number: WE-0804 | (16) 16x8 – part number: WE-1608 | (3) 16x12 – part number: WE-1612 | (8) 8x2 – part number: WD-0802 | (4) 24x12 – part number: WE-2412 | | (3) FUJI feeder carts, portable on wheels.
  • FUJI: NXT II

    Details
    ID#:
    170692
    Category:
    Spare Parts
    Lot of FUJI NXT / NXT II Module Chip Shooter Parts: | (1) FUJI NXT 2.7mm Nozzle H04 Head AA06Z00 | (1) FUJI NXT Feeder Change Jig AA87500 | (1) FUJI NXT Nozzle 3.7mm For H04 Head (AA07A00) | (10) Sleeve for FUJI NXT | (2) FUJI Fibre Sensor (For M3 Unit) XS01244 | (13) FUJI NXT Nozzle 1.3mm For H08/H12 Head (AA20A00) Green Dot | (19) FUJI NXT PIN PM04374 | (19) FUJI NXT SPRING PZ02370 | (3) FUJI NXT Nozzle 5mm For H04 Head (AA07B00) | (36) FUJI NXT Nozzle 0.7mm For H08/H12 Head AA05700 | (86) FUJI NXT Filter Assy H12 (AA19H00) | (9) FUJI NXT Filter Assy NXT H04/H08 Head (AA0AL00) | (9) FUJI NXT Nozzle 1mm For H08/H12 Head (AA05800) | (4) FUJI NXT Nozzle 1.8mm For H08/H12 Head (AA20B00) | (4) FUJI NXT Nozzle 7mm For H04 Head (AA07C00) | (7) FUJI NXT TAPE GUIDE PB22274 | (5) FUJI NXT COVER SWITCH PJ03850 | (5) FUJI NXT LEVER PB01610 | (5) FUJI NXT Nozzle 10mm For H04 Head (AA07D00).
  • FUJI: CP 4-4000

    Details
    ID#:
    139450
    Category:
    Pc Board Assembly A...
    Chip shooter | (12) 3x heads | (1) Board and (2) component cameras | 2x70 feeder places | Transport width: 60 to 360mm | (3) Conveyor stages | Flow: Left to right | Available at additional cost: FUJI feeders | Non CE marked | 1993 vintage.
  • FUJI: H12S

    Details
    ID#:
    170753
    Category:
    Pc Board Assembly A...
    Heads for FUJI NXT mounters | Auto beckup pins options.
  • FUJI: MTU

    Details
    ID#:
    9056662
    Category:
    Spare Parts
    Tray feeder | For Fuji Aimex.
Copyright © 2011 Capital Asset Exchange & Trading LLC. All rights reserved.