GSI LUMONICS LIGHTWRITER SPE Products

  • GSI LUMONICS: Lightwriter SPe

    Details
    ID#:
    156459
    Category:
    Marking Machines
    Laser marking systems.
  • GSI LUMONICS: Lightwriter LW-Spe

    Details
    ID#:
    9004133
    Category:
    Marking Machines
    Vintage:
    1998 
    Laser marking machine | Scan head | Small worksite enclosure | Electronics cabinet | Control panel | Monitor, keyboard, mouse | | ProCom marking software | 4” x 4” mark field | 50 Watt CW laser | Engrave fonts | Serialization | Step and repeat | | 208 VAC ±5%, 60Hz, 3 phase, 40 A per phase | Cooling water: 6-9 GPM 50-60 degrees F, 40 PSI (1/2” NPS connection) | | 1998 vintage.
  • GSI LUMONICS: Lightwriter SPe

    Details
    ID#:
    121210
    Category:
    Marking Machines
    Vintage:
    1995 
    YAG system, 50W | Power: 208 V, 50/60 Hz, 30 Amp, 3 Phase | Hours: 9086-16 | Some lamp fault | Marking field 5 x 5 | 1995 vintage.
  • GSI LUMONICS: Lightwriter SPe

    Details
    ID#:
    149105
    Category:
    Marking Machines
    Vintage:
    1997 
    Laser marking systems | | Configuration: | NEMA 12 industrial packaging: yes | Air conditioning of electronics cabinet: option | Nd: YAG laser: 50W Q-switched: yes | Programmable laser power: yes | Marking head and optics: | 4 x 4" Flat field lens: post scan focus: yes | 7 x 7" Flat field lens: post scan focus: option | 2 x 2" Flat field lens: post scan focus: yes | CTI superior performance Galvos: N/A | Distortion correction: yes | LightWriter user interface terminal and control: | SOLO software: yes | 486-DX IBM OS/2 based system: yes | SVGA color monitor: yes | 8 MB RAM memory: 33MHz clock: yes | Single 1.4MB 3.5" floppy disk drive: yes | 200MB hard disk drive: yes | Mouse pointer: yes | 101-key enhanced keyboard: yes | Parallel printer port: yes | RS-232 port: yes | Control and status panel (Constat): yes | Power control, laser power measurements | Closed loop pulse to pulse laser power control | Open loop laser power control | Voltage conversion transformer: | 415-208/50Hz: option | 460-208/60Hz 20kVA: option | PM chart drawing package: yes | REXX programming language: yes | Closed-loop water chiller: option | | Specifications: | Laser head: | Type: Nd:YAG | Output power: 50W | Laser wavelength: 1064nm | Q-switch mode: TEmoo to multimode | Q-switch modulation: continuous wave to 64kHz | | Marking specifications: | Typesetting: | Resolution: | Character height: 7" max | Character width: 7" max | Character spacing: 0" min, 3.2" max | Line spacing: 0" min, 3.2" max | Writing speed: engrave - constant velocity: continuous wave | Character style:Adobe type 1 fonts, fonts and graphics can be imported | | Special effects: | Circular marking: 0.1" min diameter, 7.0" max diameter | Circular direction: clockwise or counterclockwise circular marking | Italics: 0° minimum angle to ± 60° maximum angle | Field rotation: 90° increments | Text rotation: -359.9° to 359.9° in 0.1° increments | Serialization: up to 9 serial numbers per marking job: alpha and numeric | Step and repeat: 0.0" to 2.0" column and row spacing, 1 to 99 row columns | | 1997 vintage.
  • GSI LUMONICS: Lightwriter SPe

    Details
    ID#:
    171199
    Category:
    Marking Machines
    Laser Marking Systems | Includes: Laser tube.
  • GSI LUMONICS: LightWriter SPe

    Details
    ID#:
    9039594
    Category:
    Marking Machines
    Vintage:
    1998 
    Laser marking system | Does not include chiller | 208 V, 30 A | 1998 vintage.
  • GSI LUMONICS: LightWriter SPe

    Details
    ID#:
    9049298
    Category:
    Marking Machines
    Vintage:
    1997 
    Laser marker | λ=1064 nm | Power supply / Controller unit | Transformer unit | Chiller unit | Manuals | 1997 vintage.
  • GSI LUMONICS: Lightwriter SPe

    Details
    ID#:
    169668
    Category:
    Marking Machines
    systems.
  • GSI LUMONICS: Lightwriter XLe

    Details
    ID#:
    169067
    Category:
    Marking Machines
    Laser system, not operational, as-is.
  • GSI LUMONICS: Lightwriter XLe

    Details
    ID#:
    9011006
    Category:
    Marking Machines
    Vintage:
    1989 
    Laser marking machine | AEC PSA2 chiller | Aerotech Unidex 11 | 4-axis digital readout | PC | Enclosure: 36" x 36" | 2-axis slide table: 12" x 12" | 1989 vintage.
  • GSI LUMONICS: LightWriter XLe

    Details
    ID#:
    9098766
    Category:
    Marking Machines
    Vintage:
    1990 
    Laser system | Arm (where the beam is generated): currently non-operational | 1990 vintage.
  • GSI LUMONICS: Lightwriter XLe,

    Details
    ID#:
    12445
    Category:
    Marking Machines
    System, the CPU has been upgraded to a 486, ~985 hours.
  • GSI LUMONICS: WH 4100

    Details
    ID#:
    9024936
    Category:
    Marking Machines
    Laser marking machine, Part No. 267-166-00 | GSI LUMONICS XY15MN YAG, Part No. 269-328-00 | 2000 vintage.
  • GSI LUMONICS: SVS 8200

    Details
    ID#:
    9004002
    Category:
    Packaging
    SMT solder paste inspection 3D laser scanner | Software version 4.3 | Black granite table: 36.5" x 42" x 6.5" | Black granite scanner boom arm | Lower cabinet: computer, power supplies | Minimum board size: 2" x 2" | Maximum board size: 10" x 16" | Over and under board clearance: 1" | Scanner operating frequency: 5.0 MHz | Image resolution: 1024 x 960 | Zoom capability | 115 VAC, 60 Hz, 10 A | 1998 vintage.
  • GSI LUMONICS: JK702H

    Details
    ID#:
    9010596
    Category:
    Lasers
    YAG laser systems | 350 W | Welding: up to 0.1" penetration | Welding speeds: up to 100"/min | Cutting and drilling: up to 0.4" deep, with kerf widths or hole dimeters down to 0.004" | | Standard laser fixtures: | Laser head | Pre-aligned optics | Ceramic reflectors | Quick change flash lamps | High speed process shutter | Microprocessor control | Diagnostics | Pulse shaping | Single/multi-pulse selection | Modular power supply | Integrated cooling | IP55/NEMA 12 sealing | RS232 interface | | Laser specifications: | Max mean power: 550 W | Max pulse energy: 70 J | Max peak power: 7.0 kW | Pulse width range: 0.5 msec to >50 msec | Repetition rate: 0.2 to 500 Hz | | Service requirements: | Supply rating: 22 kVA (max) | Max power consumption: 18 kW | Water requirements: 6.7 gal/min at 15°C, 2 bar (min), differential pressure, 6 bar (max) | Ambient temperature: 5-35°C | Humidity: 95% at 15°C, 32% at 35°C | | 208 / 220 / 240 / 380 / 415 / 440 / 460 / 480 V | 3 phase, 50/60 Hz.
  • GSI LUMONICS: Scanarray 4000

    Details
    ID#:
    171747
    Category:
    Marking Machines
    Glass Slider Microarray Analysis System | Specifications: | (3) user-selectable lasers with an excitation range from 488nm to 633nm | Up to (7) emission filters with a detection range from 500nm to 700nm | (5) micron (5 µm) pixel resolution | Sensitivity to < 0.1 molecule fluor/ micron | 22mm x 73mm scanning area | Faster scan speeds (< 5 minutes for 22mm x 73mm) | Barcode reader option.
  • GSI LUMONICS: Voyager View V12x12

    Details
    ID#:
    9018974
    Category:
    Wafer Testing And M...
    Non-contact metrology system | | Measuring range: 300 x 300 x 150 mm | XYZ scale resolution: 0.5 um standard | Motion control: DC servo motor drives, variable speed joystick | Stage: hard coat anodized aluminum with fixture tooling holes and 25 kg load capacity | | Optical: | Magnification range: 1x - 250x | On screen magnification: 28x - 14,000x | | Illumination: | 24 V / 150 W backlight | 24 V / 150 W coaxial surface illumination | Camera polarizer | Multi-color, 4-quadrant LED programmable ring light | Ronchi grid autofocus | Polarized illumination light filters | 4-position microscope lens turret with precision reflected light illumination | Monochromatic filter and 360° polarization | | Electrical: 115 VAC, 1 phase, 50/60 Hz, 20 A, 2 kVA | Video system: 2/3" format CCD camera with 756 x 581 pixel array, 736 x 552 digitized | | Image processing: | 256 grayscale processing with 5:1 - 50:1 sub-pixeling (application dependent) | (9) Data filters | (3) Programmable outlier removal techniques | Tools for arc, line, circle, point, max/min point, corner, area centroid, histogram, blob analysis | Autofocus (edge, surface texture focus and Ronchi Grid focus) | | Software: VPL - VIEW Metrology software | | Computer: | Windows 95 | Intel processor, 64 MB RAM, 8 GB hard drive, 1.44 MB floppy drive, CD-ROM drive, 100 Mbit ethernet, 10 Base T, RJ45 network capability | 17" SVGA monitor, keyboard | | Environmental: | 17-23°C, 20-80% relative humidity (non-condensing) | Temperature change less than 1°C per hour within the specified range | | No lens included.
  • GSI LUMONICS: SVS 8200

    Details
    ID#:
    9065896
    Category:
    Pc Board Assembly A...
    Inspection System | Accuracy: 150 microinches | 120V, 10.0A, 50/60Hz | Manuals, disks, and components | 2002 vintage.
  • VIEW ENGINEERING / GSI LUMONICS: 880-200

    Details
    ID#:
    124443
    Category:
    Wafer Testing And M...
    In-tray lead / bump inspection system | Measures: QFP, TQFP, TSOP, BGA, and CSP devices | 115V, 10A.
  • GSI LUMONICS: SuperClean

    Details
    ID#:
    9008969
    Category:
    Marking Machines
    Wafer Size:
    4"-8" 
    Wafer marking system, 4"-8" | Cassette to cassette | Nd-YAG Laser | Marking Mode - Dot Matrix SuperSoftMark | Optical alignment over entire flat or notched wafers | Repeatability +/- 125um on both x and y axis | Pick and place robotic arm with dual vacuum wand | Throughput 240 wafers per hour semi specification M12-92 single pulse | Three load and unload cassette stations | Ms-dos based os with 3.5" floppy drive and IDE hard drive for data storage of operational parameters | Electrical: 208 vac, single phase, 50/60 hz | Vacuum: 25-30 inches hg at 2 scfm | Exhaust: 20 cfm flow rate max.
Copyright © 2011 Capital Asset Exchange & Trading LLC. All rights reserved.