LAURIER DS 4000 Products

  • LAURIER: DS 4000

    Details
    ID#:
    9064779
    Category:
    Die Attachers
    Die sorter.
  • LAURIER: DS 4000

    Details
    ID#:
    9086217
    Category:
    Die Attachers
    Die sorters.
  • LAURIER: DS 4000 SpeedStar

    Details
    ID#:
    20786
    Category:
    Die Attachers
    Die Sorter / Pick & Place system, parts system.
  • LAURIER: DS 3000

    Details
    ID#:
    193243
    Category:
    Pc Board Assembly A...
    Chip Sorter.
  • LAURIER: DS 7000T

    Details
    ID#:
    138778
    Category:
    Die Attachers
    Vintage:
    1998 
    Pick and place system | Setup for tape and reel | Missing board | Power: 230V, 5A, 50/60Hz | Warehoused | 1998 vintage.
  • LAURIER: DS 6000-8

    Details
    ID#:
    166873
    Category:
    Die Attachers
    Die sorter parts system | Dual cameras | Camera lenses: Optem Zoom 65 | Cameras: Panasonic WV-BL202 | Power: 208V, 5A, 50/60Hz, Plus air & vacuum.
  • LAURIER: DS-9000

    Details
    ID#:
    9080487
    Category:
    Die Attachers
    Wafer Size:
    12" 
    Vintage:
    2007 
    Die Sorter, 12" | Used in 12" to transfer into 6"-8" wafer frames | 2007 vintage.
  • LAURIER: DS 3000

    Details
    ID#:
    9018839
    Category:
    Die Attachers
    Die sorter.
  • LAURIER: DS 7000

    Details
    ID#:
    165301
    Category:
    Die Attachers
    Vintage:
    1997 
    Die sorter, 8" frame | | Specifications: | Dual collet transfer arm | Stepper motor driven 9"x 9" input table | Motorized theta, fixture for one frame size | Stepper motor driven anvil / die ejector assembly | Input / Output optics with 6.5 to 1 detended zoom and on axis lighting | Micrometer adjustable pick and place heights | Stepper motor driven 9"x 9" output table fixtured for output carriers | (1) AMS brain board has failed and causes the system to not initialize | Set up for wafflepack | | Warehoused | 1997 vintage.
  • LAURIER: DS 6000

    Details
    ID#:
    142632
    Category:
    Die Attachers
    Die sorter parts system | (2) WV-BL202 cameras | Amperage: 5A | Voltage: 208V | Hertz: 50 / 60 Hz.
  • LAURIER / DATACON: DS 9000

    Details
    ID#:
    9021811
    Category:
    Die Attachers
    Die sorting system | Set up for die sorting into tape and reel | Pick & place at up to 8’000 devices per hour | Sort 300 mm and smaller wafers to 300 mm or smaller output tape frames | Fully automatic cassette to cassette operation n Placement accuracy of +/- 50 μm | Vision inspection before picking and after placement | Die size capable from 0.5 mm - 32 mm and as thin as 50 μm | Electronic map import n Die track mapping of output frames | Optional placement to waffle packs or Gel-Paks | Windows Operating System | 208 V, 50/60 Hz, 1 Phase, 8 Amps | | PC control with Windows XP | Servo-driven pick and place head with dual arms | Servo Z motors for independent pick and place motion | Digital vacuum detection | Motor driven, programmable die ejection system | Heated anvil to assist die removal from dicing tape | Input table for 8" wafers with motorized rotation | Output table into tape and reel | Programmable wafer expansion | Air ionizer mounted over the input table | Vision system for wafer alignment, die pick, die placement and inspection | Operator and service manual | Wafer stage and output table camera and optics | Wafer table tooling for one size 8" frame | Wafer cassette elevator and loader | Wafer frame barcode reader | Product specific tooling (max 5 sets) | Output table tooling for one size 8" frame | Output onto tape and reel | Electronic map import | | Mapping: | Row / column and array formats | SECS II | ALPS | | Throughput: | 8’000 UPH sprint rate | 7’500 UPH typical for die < 5mm | 7’000 typical for die > 5mm | | Inspection: | Edge chip detection | 2D Bump | Place position X, Y, Ø | | Placement accuracy | +/- 50 μm @ 3 sigma | +/- 1 degree theta | | Die size: | 0.5mm to 5mm | 5mm to 32mm | | Cassette input: | 25 slot, 3/16 inch pitch | Frames 12 & 8 inch | | Cassette output: | 25 slot, 3/16 inch pitch | Frames 8 & 12 inch | Carrier plates for waffle packs 2, 3 & 4 inch | | 2008 vintage.
  • LAURIER: DS 6000

    Details
    ID#:
    9000804
    Category:
    Die Attachers
    Die sorter | Wafer size: up to 6" | Loads waffle packs | Dual camera, high speed | Does not have tape and reel option.
  • LAURIER: DS 7000

    Details
    ID#:
    9094043
    Category:
    Die Attachers
    Wafer Size:
    8" -12" 
    Die sorter, 8" and 12" | JEDEC trays only | Manual frame handling | Automated JEDEC tray stack feeder with up to (25) JEDEC trays | Bar code reader | 2001 vintage.
  • LAURIER: DS 3000

    Details
    ID#:
    9090815
    Category:
    Die Attachers
    Die sorter.
  • LAURIER: DS 9000

    Details
    ID#:
    198907
    Category:
    Die Attachers
    Wafer Size:
    12" 
    Die sorter, 8" - 12" | Pick and place | CCD system upgraded in 2010 | | Pick & place at up to 8000 devices per hour | Sort 300 mm and smaller wafers to 300 mm or smaller output tape frames | Fully automatic cassette to cassette operation | Placement accuracy of +/-50μm | Vision inspection before picking | D after placement | Die size capable from 0.5 mm- 32 mm and as thin as 50 μm | Electronic map import | Die track mapping of output frames | Windows XP | | No special adapter for waffle pack/gel option to waffle packs or Gel-Paks | 2006 vintage.
  • LAURIER / BESI: DS 11000

    Details
    ID#:
    9086215
    Category:
    Die Attachers
    Sorter.
  • LAURIER: DS 7000

    Details
    ID#:
    9088463
    Category:
    Die Attachers
    Die sorter.
  • LAURIER / DATACON: DS 9000

    Details
    ID#:
    188302
    Category:
    Die Attachers
    Vintage:
    2011 
    Die sorting system, 2011 vintage.
  • LAURIER / BESI: DS 11000

    Details
    ID#:
    9094550
    Category:
    Die Attachers
    Sorter.
  • LAURIER: DS 7000

    Details
    ID#:
    173338
    Category:
    Mask & Wafer Inspec...
    Wafer Inspection Station.
Copyright © 2011 Capital Asset Exchange & Trading LLC. All rights reserved.