VITRONICS SOLTEC MODEL DELTA WAVE 6622CC Products

  • VITRONICS SOLTEC: 6623 CC Delta Max Wave

    Details
    ID#:
    165882
    Category:
    Pcb Solder Machines
    Vintage:
    1998 
    Wave solder machine | 24 inch max process width | V-shaped fingers w/ auto finger cleaners | Dual flux supply system w/ on screen monitoring | Dual head nozzle spray fluxer for dual flux application | 3 bottom side preheaters (full 6 ft. length) using Calrod Long wave IR heaters (8.8 kW each) | Motorized solderpot height adjust | Solder level measurement system w/ low level alarm | Automatic overheat switch off | Dual wave, with Automatic solder addition for 2 solder bars | PCB tracking | Windows based operating software | 480 VAC | 1998 vintage.
  • VITRONICS SOLTEC: 6622 Delta Wave

    Details
    ID#:
    9057042
    Category:
    Pcb Solder Machines
    Vintage:
    2005 
    Wave soldering machine | | Lead free wave soldering machine | Internal spray fluxer / extended length | Drip pan after spray fluxer | (3) Bottomside preheaters:(2) Convection / (1) IR | Finger conveyor 20″ process width | Finger cleaner | Standard wave | Chip wave | L to R process flow | Computer controlled: Windows OS | Motorized solder pot: In/out up/down | | 2005 vintage.
  • VITRONICS SOLTEC: 6622 CC Delta Wave

    Details
    ID#:
    9042836
    Category:
    Pcb Solder Machines
    Wave soldering machine | Warehoused | 2001 vintage.
  • VITRONICS SOLTEC: 6721 CC Delta C

    Details
    ID#:
    9006868
    Category:
    Pcb Solder Machines
    Wave soldering system, lead-free | PCB max width: 18.1" | Basic system according to General Specification GS 291 | Under-frame to increase machine height 6.69" | CE compatible in and outfeed covers, must be ordered for Europe | Standard color: grey white panels (RAL 9002) | | Controls and software options: | Management information system, storage of all parameters per soldered PCB (PCB triggered) | Working hours counter | Power supply: 400 V, 3 phase, 50/60 Hz | | Conveyor with titanium fingers: | V-shaped fingers | Front rail adjustable, rear rail fixed | Finger wetting system to reduce solder adherence | Note: recommended option in combination with nozzle spray fluxer | Crash detection system to prevent PCB and finger damage at in and out-feed side | | Conveyor extensions: Extended in and out-feed guidings, non-driven, 19.6" in-feed, separately driven | | Single head nozzle spray fluxer | Nozzle caps: nozzle fluid cap FC16 (1.5 l/h @ 0.2 bar; 1.9 l/h @ 0.3 bar) | | Preheat, (2) zones, full length (4 ft) | Zone 1: | Zone length 23.6" | Calrod long wave IR (8.8 kW) | | Zone 2: | Zone length 23.6" | Forced convection module (9 kW) | | Solder pot: | Motorized solder pot height adjustment | Integrated frame for motorized solder pot roll out | Solder level measurement by float with low level alarm | Valve for solder drainage, includes drain pipe | Adjustable backplate | Separate dross compartment and oxide bins | Automatic overheat switch off | Dross minimizer around wave formers | Sealing at the pump shaft to eliminate oxide powder production | Chromium finished pump impellers to reduce wear in lead free application | PCB width: 16.1" | | Solder pot options: | Automatic solder addition for two solder bars | | Wave type: | Single wave (Woerthman) – 1 motor pump does the same work of 2 waves, 2, 5 rows of holes with special configuration | | Special options: | Special PC 42434 (Win 2000, 256 MB RAM, network card), 79071SP | Preparation and installation of Woerthman wave, 78461SP | Upgrade pressure flux supply SNSF delta C 6721, 78458SP | Upgrade extra pressure vessel, 78459S | Upgrade filter and air release in flux supply 6721, 79085SP | Upgrade special infeed guidings wheels system, 77010SP | Upgrade guiding plates for solder bars, 79084SP | | 2002, 2003 vintage.
  • VITRONICS SOLTEC: 6723 Delta Max

    Details
    ID#:
    81163
    Category:
    Pcb Solder Machines
    Vintage:
    2000 
    Wave solder machine | Spray fluxer | 3 Convection preheat zones | Glass covers on preheat zones | Full N2 machine | Standard wave and chip wave | Dross separation | Auto bar solder feeder | X-Select de-bridging system | Finger cleaner | Windows based software | Auto width adjust | Motorized pot – in/out, up/down | 2000 vintage.
  • VITRONICS SOLTEC: 6621 Prisma Wave

    Details
    ID#:
    148485
    Category:
    Pcb Solder Machines
    Vintage:
    1997 
    Wave solder system | White with smart wave | SV | Foam | Left to right | Conveyor finger adjustable V width | (2) Cassettes Calrod | Electro | 1997 vintage.
  • VITRONICS SOLTEC: Midi Wave

    Details
    ID#:
    132539
    Category:
    Pcb Solder Machines
    Wave soldering system | Finger conveyor | Foam fluxer | (2) Sections CAL-ROD pre-heat | Crank-out pot | Power requirements: 220/230V.
  • VITRONICS SOLTEC: 6721 CC Delta C

    Details
    ID#:
    82660
    Category:
    Pcb Solder Machines
    Vintage:
    2001 
    Dual wave solder unit | Reciprocating spray fluxer | Left to Right Process width: 460mm | Finger conveyor | Finger cleaner | Nitrogen capable | Convection pre-heat | 2 sections of pre-heat, one calrod, one convection | (3) Bottom CALROD heating zones | Spray fluxer: internal | Dross removal | Auto bar solder feeder | X-Select debridging system | Motorized pot | 400Volt, 3-phase, 60 Hz | 2001 vintage.
  • VITRONICS SOLTEC: Delta Max

    Details
    ID#:
    9035835
    Category:
    Pcb Solder Machines
    Wave solder machine | with N2 | 2005 vintage.
  • VITRONICS SOLTEC: 6723 CC Delta Max

    Details
    ID#:
    199902
    Category:
    Pcb Solder Machines
    Wave solder machine | Dual wave - smart and chip | 3 preheat sections | Internal spray fluxer | Motorized pot, roll out solder pot | Solder feeder, auto width | 2001 vintage.
  • VITRONICS SOLTEC: Prisma Wave

    Details
    ID#:
    9017874
    Category:
    Pcb Solder Machines
    Wave solder system.
  • VITRONICS SOLTEC: 6622CC

    Details
    ID#:
    9055276
    Category:
    Ovens / Furnaces
    Vintage:
    1999 
    Wave solder machine | Leaded solder pot | Air knife: no | Spray fluxer: (1) head nozzle fluxer | (3) Preheaters: (2) calrod zone, (1) IR lamp zone | Preheater location: bottom side, covered with tunnel | 1999 vintage.
  • VITRONICS SOLTEC: Delta 7L

    Details
    ID#:
    9035834
    Category:
    Pcb Solder Machines
    Wave solder machine | Includes N2 | 2007 vintage.
  • VITRONICS SOLTEC: 6621 Prisma Wave

    Details
    ID#:
    9017773
    Category:
    Pcb Solder Machines
    Wave solder system | Solder pot capacity: ca 800 kg | Air: 6 bar 11 m3/h | Largest load: 68 A | Power: 32 kVA | Voltage: 400V 50 Hz | 1997 vintage.
  • VITRONICS SOLTEC: 6622 CC

    Details
    ID#:
    9010548
    Category:
    Pcb Solder Machines
    Vintage:
    1997 
    Delta wave soldering machine | Max temperature: 250°C | 43.5 kVA | Air consumption: 30 m3/h | Air pressure: 6 bar | N2 consumption: 15 m3/h | N2 pressure: 6 bar | Conveyor speed: 20 mm/sec. | Bath length: 2,200 mm | Working width: 330 mm | Boards: 400x600 mm | Preheating: 3 zones (top/bottom) | Calrod/convection/IR lamps | Mainwave, smaltwave, chipwave | Solder bar feeder | Spray fluxer | Finger cleaner | Includes PC program and technical books | 1997 vintage.
  • VITRONICS SOLTEC: 6622 CC

    Details
    ID#:
    158414
    Category:
    Pcb Solder Machines
    Vintage:
    1999 
    Delta Wave solder machine | 3x400V - 48.5KVa | (3) preheat sections: | 1 and 2 bottomside convection, 3rd IR top/bottom | Includes: finger cleaner, solder bar feeder, motorized pot, crank width adjust, dual pump, and internal OEM spray fluxer. | 1999 vintage.
  • VITRONICS SOLTEC: 6622 CC

    Details
    ID#:
    144034
    Category:
    Pcb Solder Machines
    Delta Wave Solder Machines.
  • VITRONICS SOLTEC: 6622 C

    Details
    ID#:
    118393
    Category:
    Pcb Solder Machines
    Delta Wave solder machine.
  • VITRONICS SOLTEC: 6622 C

    Details
    ID#:
    165272
    Category:
    Pcb Solder Machines
    Vintage:
    2000 -2004 
    Delta Wave solder machines, 2000-2004 vintage.
  • VITRONICS SOLTEC: MySelective 6748

    Details
    ID#:
    144562
    Category:
    Pcb Solder Machines
    Vintage:
    2002 
    Selective solder machine | (2) convection and (1) IR preheats | PCB transport conveyor | Multi-wave | Inline multi-fluxer | Multiple gripper heads | Teaching camera | Transformer | N2 | Manuals and accessories | Transport system: | In-line integration | Integrated MultiFlux unit | Accurate positioning for load and unload PCB / pallet | Multiple preheat modules capable | Location pins | MultiFlux: | Utilizes single or dual dropjet fluxing head on X-Y table | Programmable drop size | Individual solder joints or multiple rows of joints | Preheat: | 9 KW (6748) or 10.5 KW (6749) installed power | Multiple zones available | Multi-wave: | Patented sideflow ensures temperature stability in nozzles | Stabilizer hole equalizes wave height regardless nozzle of diameters | Multiple nozzle plates for maximum flexibility | Nitrogen cover for oxide-free soldering | Securegrip: | Standard gripper with application-specific tooling | Tiltable in 2 directions at different angles: +/- 7°, +/- 10° | Component positioning tooling can be integrated | Securegrip rotates 360 degrees | Snap-in changeover between different grippers | Single point teaching off-line: | Teaching solder points is executed above the camera for all processes in the machine | Unlimited number of recipes | Dynamic calibration: | Continuous verification and active compensation of robot position | Ensures a reproducible process | Programmability: | Windows graphical users interface | Software includes graphical analysis of production data | Fully configurable password setup | Intelligent alarming with integrated help screens | Link to specific website and machine verification | Facility requirements: 400V, 3 phase, 43 kVA | Can be inspected and demonstrated | 2002 vintage.
Copyright © 2011 Capital Asset Exchange & Trading LLC. All rights reserved.