EQUIPMENT WANTED
Click on an item to be put in direct contact with the buyer.
List Equipment For Sale to list the item you want to sell. CAE Online will automatically notify you of new buyers who are looking for what you have.
Automatic machine for ultrasonic stitch bonding of 20-35mcm Al wires, Power: 220V, Led chips: 7pcs (max) in one row, Productivity min 5,000 bonding points in an hour. (1) DAGE 2400A-BS5KG die shear load unit (the cartridge only). (1) EV GROUP / EVG 520 Semi-Automated Wafer Bonding System, 8" capable. (1) EV GROUP / EVG 810LT LowTemp Plasma Activation System. (1) F&K DELVOTEK 2600 wire bonder.. (1) F&K DELVOTEK 6200 Bonder, in the USA. (1) F&K DELVOTEK 6400 Bonder. (1) F&K DELVOTEK 6666 bonder. (1) FINETECH Fineplacer bonder, as is or Refurbished / Warranty. Will consider alternate /equivalent models such as Finetech Pico MA. Budget: $16,000.00 (1) FINETECH Fineplacer Lambda die bonder with pickup tool heater. (1) FINETECH Fineplacer Lambda, Pico, etc. flip chip bonder, as is or refurbished. Budget is $90,000. (1) HUGHES 2460-5 Bonder, as-is. (1) HUGHES / PALOMAR 3500-II Die attach machine, 8", refurbished. (1) K&S 8028 bonders, budget is $16,000. (30) K&S 8068 gold aluminum wedge bonder. (1) K&S 8090 large area bonders (only this model). As-is OR Refurbished/Warranty. Budget: $100,000.00 (1) K&S 8098 bonder. (2) K&S Maxum bonders. Need 50+. Vintage 2003 or newer. Budget: $27,000. (1) MECH-EL 9000 bonders, any condition. (2) ORTHODYNE 360C, 360CH, or 360CHD bonders. (3) ORTHODYNE 360C Bonder. (2) ORTHODYNE 360CHD bonder for TO220 package. (1) PANASONIC / KME HW27 stud bump bonder that can bump a min. 6" wafer and bump at least 5 bumps/sec. (1) WENESCO or Equivalent Manufacturer Ultrasonic Soldering Iron. Budget is $1700. Used or refurbished condition. (1) WESTBOND 7700B bonders, manual gold, Aluminium wedge / ball bonder and Ribon bond capability. Will consider alternate / equivalent models such as TPT HB5, TPT HB12, TPT HB16. As-is. (4)
ABSORPTION CHILLER 100, 150 to 200 ton. (1) AEC chiller, 20-25 Ton Water Cooled, 230V. Refurbished/Warranty. (1) CARRIER , TRANE, or YORK chiller, approximately 200-250 tons. Budget: $20,000 - $30,000 (1) Chiller: 100 ton with 2 heat exchanges (one for cold/hot), in good working condition. Budget: $12,000 - $15,000. (1) YORK LTJ-76 chiller. (1) YORK YCAJ17/50D chiller, as is or refurbished, budget is $40,000. (1)
HASKRIS R175 Chiller (only this model), as is or refurbished / warranty. Budget: $10,000.00 (1) LIEBERT Deluxe System 3 cooling system, Model: DH/DE, VH/VE. Alternate/equivalent models such as FH/UH. Air, Water or Glycol cooled systems. As-is or Refurbished/Warranty. Budget: $3,000.00 (6) NESLAB M33 recirculating chiller, 1/3 to 1/2 hp, 1 gallon per minute minimum, 115v or 230v, Refurbished / Warranty, will consider alternate /equivalent models. Budget: $1500.00 POLYCOLD PFC/PFC 1100HC chillers. (1)
Any CLEANROOM, Class 10,000 or 100,000, FRP or fiberglass, max height of 12 feet 6 inches, prefers seller to be located in mid west, not interested in new. Can also accept portable. (1) CLEANROOM: Class 10, 3000sqft, perforated flooring is preferred. (1) CLEANROOM - USED (not new): Class 100,000 or less, minimum size 20' x 24', softwall or portable. (1)
Any Manufacturer: CZ Silicon crystal puller, (Similar to a Chinese model TDK-40) 2" max diameter of the ingot, 1Kg silicon charge, refurbished or new. Budget is $20,000. (1) Crystal grower, min size of crucibal: 0-10 kilograms, refurbished with warranty. (1) GaAs ingot puller. (1) HEM or DSS Casting Furnace for Silicon ingots. New or refurbished condition. (1) KAYEX / HAMCO 3000 Crystal Grower. (2) KAYEX / HAMCO 6000 series Crystal Grower. (1) KAYEX / HAMCO CG 800 series grower previously used for Silicon CZ growth, in working condition, can be recently used or in long term storage. Require a system with all parts, ready to install and use, but do not need hot zone or crucibles. Budget max is $10,000. "Periscope" option not needed. Desire Pull Rod version, 36" minimum stroke, but cable/chain version acceptable. Must be ready to install/use, not missing subsystems or standard components. (1) MEYER BURGER BS 801 Band Saw. (1) MEYER BURGER DS 262 or DS 264 wire saws. (1) MEYER BURGER DS 264 or 265 saw. (1) MEYER BURGER GS 1 wafer saw. (1) MEYER BURGER TS 121 OD Saw capable of OD cutting several pieces of sapphire at a time using multi-arbor OD cutter, 2"-4". Budget is $20,000-$50,000. (2) MEYER BURGER TS 207 Ingot Cropping Saw. (1) Wire saws for solar application: Will consider any manufacturer/model. Will consider new and used. As a point of reference, buyer is currently looking at MEYER BURGER DS 262 and DS 264 at approximately $700,000 per saw. Will need to purchase multiple saws over the next 2 years. (1)
ASM AD 829 die bonder. (1) ASM AD 898 die bonder. Working condition. (1) DATACON APM 2200 die bonder with dispenser, die pick and place, and wafer ring handler. (1) ESC 9000X or 9100 Magnum pick and place or epoxy die bonders. Budget is $1500-$5000 each. (2) ESEC 2005 or 2007 Soft Solder. (5) ESEC 2005 or 2007 Soft Solder. (1) ESEC 2007HS bonder. Only this model. (1) KARL SUSS FC 150 flip chip bonder. (1) KARL SUSS FC 250, Finetech Lambda, or Laurier M9 Flip Chip Bonder, refurbished with warranty. (1) LAURIER DS 4000 Die pick and place from wafer to waffle tray, 5". (1) LAURIER DS 4000 or 7000 SpeedStar Die Sorter / Pick & Place systems, must be 8", tape and reel (not Jedec tray system), 2000 vintage or newer. (1) LAURIER DS 7000 which is configurable for 6" wafer film frame and 2" and 4" waffle pack outputs. As is or refurbished. (1) LAURIER M9 Die Bonders (only this model). As-is OR Refurbished/Warranty. (2) Pick and Place tool needed to pick die from 4" Si wafer and place into gel-pak. As is or refurbished. Budget is $100,000. (1) RESEARCH DEVICES / RD AUTOMATION M-8 or M-9 flip chip bonder. (1) ROYCE DE22-6 pick and place. (1) SST 3130 void free die attach tool (or similar model from SST). (1) VIKING / DYMATIX 1010D (or similar) Die Mounter. (1) VIKING / DYMATIX 1041, 1042, or 1046 pick and place die attachers. Must have Cognex vision. (1)
Boron and Phosphorous Horizontal Diffusion Furnaces, 6", max 1000°/930°, 4 stack (or 3 stack), target sheet resistance is 40 to 50 ohm per square. (2) BRUCE BDF-41 horizontal furnace. Specs: AP furnace-2 banks, LP furnace-1 bank. As-is. Budget: $100,000. (1) CENTROTHERM VLO 20 forming gas/vacuum oven. Will consider alternatives: Acrosemi, Asscon, ATV, Centrotherm, UniTemp, Shinko Seiki Co., or equivalent. As-is OR Refurbished/Warranty. (2) CENTROTHERM VLO 300 vacuum solder reflow oven / furmace. (1) Diffusion furnace: Any mfr/model. Up to 8", N and P diffusions, 1 chamber lab system. Up to 1250°C, < +/- 2.5phm/sq wafer to wafer, Gas inlets 2-3. (1) Furnaces with these specs: GASONICS HIPOX VHP vertical furnace. (1) GASONICS HIPOX VHP ( Vertical High Pressure) furnace for 6" wafer. (1) TEL Alpha 8SE Vertical furnace. Loadlock, 1000°C process temp, SMIF, 8" Semi Std Notch, SiC boat, WAVES controller. (1) TEMPRESS or similar 3 stack horizontal furnace for 8" wafers w/ 1000mm temp flat zone and 12" for hydrox process, As is, Budget is $50,000 to $60,000. (2) THERMCO 4904 or 5200 stack furnace for 4 tubes. Prefer the SMC control for computer host. (1)
CSI 2117, 2120 or 2130 vibration measurement instrument. New, demo, or refurbished. Good working condition. (1) CSI 2120-2 vibration measurement instrument (or similar). (1) EM TEST UCS 500-M ultra-compact tester (only this model). As-is or refurbished. (1) FLUKE 5700A or 5720A (1) FLUKE 8845A. Will consider alternate /equivalent models such as: 8840A, 8846A, 87, 8050A, 8024B, 8010A or 77DMM. Refurbished/Warranty. (1) HEWLETT-PACKARD 66311B 10 sets as accessories of CMU 200. Budget: $580.00 per set (1) HEWLETT-PACKARD / AGILENT 4071A or 4072 Parametric tester, refurbished with warranty. (1) HEWLETT-PACKARD / AGILENT 4194A. 4192A, or similar Impedance analyzer with a range of 5kHz to 13mHz. (1) HEWLETT-PACKARD / AGILENT 86100A 1 mainframes (only this model). Refurbished/Warranty. Budget: $10,000.00 each. (2) HEWLETT-PACKARD / AGILENT J5426A VQT responder. (1) KEITHLEY 2400 Source meter in as is condition. (1) PULSE INSTRUMENT PI 2000-32 Parts or parts machine. (1) ROHDE & SCHWARZ CMU200 6 sets with GSM 850/900/1800/1900/GPRS/ CDMA2000 900/1900. The option list is B11, B21, B41, B52, K21, K22, K23, K24, K83, B83, K42. Budget: $23,000 per set (1) SANTEC PEM320-1-F-S-00 test equipment. (3) SIECOR M90 Fusion Splicer, Serial number must be above 5000. (1) TEKTRONIX 371B curve tracer (Only this model). Refurbished/Warranty. Budget: $30,000.00 (1) TEKTRONIX TDS7104 Oscilloscope. Budget is $1300. (1) THERMOTRON or LDS Vibration system, min. of at least 6000 - 9000 lb force, Random Vib controller, Low profile with chamber. (1) Vibration system: 6,000 lbf Sine, 5,000 lbf Random, 2” stroke, All solid state construction switching power amplifier, 25 KVA output, 100% Air Cooled. (1)
BLUE M 256 environmental chamber. Budget: $500 - $600. (1) COPELAND COMPRESSOR (M)-KWK2-0100 CAB compressor / refrigeration chamber. (1) ENVIRONMENTAL CHAMBER: Walk in hot/cold chambers roughly 10' L X 10' W X 8'H, would like humidity control, as-is. Budget is less than $30,000 for 2 units installed. (1) ENVIROTRONICS EV40-2-20 (or equivalent) env. chamber. New or used condition. Temp range: -73°C to 150°C, Temp control: +/-2F, Temp rate of change: +/-10C/min. Humidity control desired. Instrumentation controller / programmer w/ RS232 interface (ability to control / modify). (1) LEYBOLD HERAEUS 1100 chamber with valves for vacuum operation, substrate holder, and if available, with diff. pump and rotary roots station, as-is. Will consider other makes/models such as Balzers, Satis or Denton. (1) THERMOTRON SE 600 or SE-300 (only these models) chambers. (1) THERMOTRON SE 600-3-3 or Environmental chamber that has: VACUUM ATMOSPHERES Vacuum Glove Box, as is or refurbished/warranty. (1)
8" single wafer RIE etcher. System needs to have a footprint approximately that of a LAM Rainbow. Due to space constraints, a cluster tool is not an option. Considering manufacturers such as: LAM, TEGAL, ULVAC, HITACHI, TEL. Budget is $200,000. (1) ALCATEL AMS 100DE or 200DE Deep SiO2 etcher for 20 micron, 6". (1) APPLIED MATERIALS Centura 5200 DPS, as is, 8", budget is $600,000. (1) APPLIED MATERIALS P 5000 MxP+ w/ min 3 process chambers oxide process, as is. 6". Budget is $220,000. (1) Asher, 8" single wafer, cassette to cassette, microwave plasma source, quartz chamber... throughput is 10 wafers/hour, but PR thickness is over 10um, and we have to control the process temperature <350C. The target budget is $85,000. (1) ASI ARISTA / MATRIX 208 series Bobcat. (1) AXCELIS / FUSION Gemini GES or GPL asher. As is. Budget is $100,000. (1) CANON MAS 8220 stripper. (1) ETCHER / ASHER for 6" and 100mm X 100mm Square, for SiO2, SiN or PI etc. etching, singer chamber, with loadlock, PC control, Windows operating, 6 gas lines, more than 6 wafers per hour. Budget: $10,000 FSI EXCALIBUR 2000 machine with 2 process chambers each, 8", 208v, 2 process consoles, 1 Facade for 1 electronic / 2 process module system, 2 standard gas panels, 4 HF MHC 500cc, 2 Standard Pneumatic Panels, 2 DI panels, 2 PVC exhaust (Standard), 2000 vintage or newer. (2) GASONICS L 3510 Asher, 8", budget around $120K. (1) GASONICS L 3510 Asher / Stripper. (1) LAM 4520i systems. (1) LAM 9400 Poly etcher, as is condition, budget is $330,000. (1) LAM 9400 Poly etcher, refurbished or as-is, 6"-8", 1998 vintage or newer, CE marked if possible. (2) LAM A6 4520XLE Oxide Etcher, 8", as is, min 2 chambers, budget is $600,000. (1) LAM Alliance 9400 PTX. (1) LAM Alliance HPT System, 8", CE marked. (1) LAM complete lower chamber assy (852-011061-503) for 4420 poly etcher or any version 852-011061-xxx. (1) MARCH AP 1000 or PX 250 plasma system or equivalent. (1) MARCH AP 1000 plasma system, 8". (1) MATRIX 104, 105, 106, 111, 303, all models of etchers - any condition, 2"-6". (3) MATTSON 25+2 acid etcher, As-is, Budget $150k to $400k (1) MATTSON Aspen II PECVD, 6". (1) MATTSON Aspen II with ICP chamber or Triode / Diode Chamber, Single chamber or Dual chamber, System condition is not concerned, 6" or 8". Budget is $100,000 to $150,000. (2) MERCATOR / MCS LF-5 plasma system, 12". (1) OXFORD 100 (or equivalent) Advanced ICP system with at least a 12 month warranty. Preferred specs: OXFORD Plasmalab 100 plasma etcher with ICP, interferometer, high performance system and helium backside cooling or even wide temperature range electrode, or a system with most of these options. OXFORD Plasmalab 800 plus etcher. (1) OXFORD Plasmalab System 90+ RIE Etcher, budget $20-25k. (1) Plasma Cleaner / Etcher to Clean and remove organics on metals and glass parts. Need level entry working system. Budget: $10,000. (1) PLASMATHERM / UNAXIS VLR 700 ICP / PECVD / RIE chamber with 6" or 8" tooling - Chamber MUST be setup for single wafer operation, 1999 vintage or newer preferred in good condition. Will buy AS-IS-WHERE-IS (1) SEZ DaVinci or 323, 8". (1) SEZ SP 101 spin etcher. (1) SEZ SP 103 Spin Etchers. (1) SEZ SP 203 Spin Etchers. (1) STS Multiplex ICP system configured for deep silicon etch, Budget is $150,000-$190,000 from end user depending on vintage. (1) STS or UNAXIS Deep RIE, 4", as-is or refurbished, 2002 vintage or newer. (1) STS standard rate (SR) 1kW or high rate (HR) 3kW ICP which had been used for etching III-V material. Silicon etchers have a lot of extras that are not required. Do NOT want HRM, Pegasus, or AOE / APS. (1) TECHNICS Micro 800 RIE-II (Only this model) for 6" square glass, As-is OR Refurbished / Warranty. Budget: $15,000. (1) TEGAL 901E or 903E etcher, as is good condition, budget is $10,000-$20,000. (1) TEGAL 9821 Etcher. (1) TEL TE 8401 poly etcher, 6". (1) TEPLA PP-300 microwave etcher. (1) TRIKON / AVIZA Celsior process module, budget is $10,000. (1)
CHA MARK 50 E-beam Evaporator, as-is. Budget ranges are from $100,000 to $170,000. (1) CHA MARK 50 evaporator, as is, $60,000 budget. (1) CHA Mark 50 or equivalent alternative E beam evaporator, 4" wafers, heat, 4 pocket gun, PLC or relay logic control, cryo pumped, with mechanical pump. (3) LEYBOLD LAB 700EB coating machine. (1) ULVAC EBX-2000C ebeam evaporator. (1)
ADVANTEST T 5334 Test system (only this model). As-is or Refurbished / Warranty. (1) ADVANTEST T 5585 Memory Tester with M 6541AD x 2 or 6542AD. (1) CREDENCE Kalos Tester. (any model / config considered). (1) CREDENCE Kalos Testers. Will consider any configuration. (1) CREDENCE TMT ASL-1000 Test system. (6) CREDENCE TMT ASL-3000 Test system. (1) EAGLE ETS 364 Test System. (3) EAGLE LSI 5XP test system, must be in operational condition. (2) HEWLETT-PACKARD / AGILENT 82000 D50 / 100/ 200/ 400 testers. (2) HEWLETT-PACKARD / AGILENT 83000/ F120T or F330T Tester, 64 - 512 channels, 1M or more vector memory (4-8M will be nice), scan and analog options is a plus, any configurations considered. (1) HEWLETT-PACKARD / AGILENT 83000 tester with 320 pins. Budget is $40,000. (1) HEWLETT-PACKARD / AGILENT 83000 Tester with 8M Vector Memory. (2) HEWLETT-PACKARD / AGILENT 93000 / C400e tester (only this model). 560 I/O Channels, 28M Vector Memory, 16 Channel GPDPS, 2M SRAM, Big Test Head 1024. Refurbished with warranty. Budget is $800,000. (1) HEWLETT-PACKARD / AGILENT 93000 Tester, minimum of: 256 pins of PS3600 each with 32MB memory, HEWLETT-PACKARD / AGILENT 93000 Tester, preferred configuration: HW Start-Up Assistance, UX 11I, PCI based GPIO/F, C3750WS (2GF) ctrl. Bundle (20’TFT), 93k SW (media), SOC SmarTest sw 2-cont lic, SOC Memory sw 2-cont lic, SOC Multisite sw 2 cont lic, E2760FA Cooler Spare Kit, Spare Parts Kit for SOC Series 448/960, Incremental spare kits GPDPS and HVDPS, Incremental spares for SOC960 pin system, SOC Series Prober Plates S-I/f Type 1, WP I/F probe stiffener, WP I/F pogo tower S-I/F automatic, WP I/F 128 pin SOC, WP I/F blank SOC, WP I/F dut Quick Lock, Wafer Prober IF DUT Bd Dig 1024 pin SOC, Cooler liquid / liquid ECO-cooler 1, 5m hose kit for cooling unit, Adapter kit for 1024 pin TH, SOC GP manipulator for 960+4TH, Cal Diag DUT board for S-I/F, Calibration matrix S448+4/S0960+4, SOC TH power digital/digital, SOC TH power analog/analog, Power Control P Model, Clock Unit P Model, Large Rack P Model, Common TH 8CC S2, Pogo cbl digital for SOC S-I/F, S960+4 DUT interface, SOC Series Model P600 16ch board 28M - (Qty 18 boards - 288 I/O pins), General Purpose DPS (qty 4). (1) HEWLETT-PACKARD / AGILENT E2777B dual fibre channel interface cards for the HPC3600 workstations used to control operation of an online HP 83000 tester. (10) HEWLETT-PACKARD / AGILENT E3007-61034 : DPS_PS DUT Power Supplies. Budget is $1000 each. (6) HEWLETT-PACKARD / AGILENT E3008-61005 SFG adapters (only this model). As-is OR Refurbished/Warranty. Budget: $500.00 (1) HEWLETT-PACKARD / AGILENT VT 1204 testers. (1) HEWLETT-PACKARD / AGILENT VT 3308 flash memory tester. (1) IMS ATS2 Blazer testers. Already have an IMS ATS Blazer but would like to increase its I/O capability. Currently have (and are looking for) the 200e I/O pin IMS cards with P/N 120-0280-512, The 120-0280-XXX needs to be the same. The 512 refers to the memory, so if the memory was greater that would be OK. Cannot use GaAs cards or cards that are not the 200MHz 200e cards. (1) KEITHLEY S-900 tester. (1) KEITHLEY S-900NT tester with NT operating system and Keithley probe card interface for 6" round probe cards. (1) NEXTEST Maverick PT/64 Test System, system must be operational. Budget: $7,000.00 (1) ROOS RI 7100A RFIC tester. (1) SZ M 3000 Tester. Any configurations considered. (1) TERADYNE IP 750 512pin tester, must be IP, good working condition. (1) TERADYNE J750 tester with the following config: 32 DPS and 256 Digital Channels with digital speed of 50mhz. 32 DPS Device power supplies required. (1) TERADYNE J750-100 Tester, 512 channels, 100Mhz digital I/O, OTA +/-500pS, Includes: 16 Meg LVM, 1 set of DPS (8 channels rated @ 1A, 10V), 8 PMU (1 per each 64 channels), 32 High V Drivers (4 per each 64 channels) -> Part of standard config, but are not utilized. Pentium PC including: 21" monitor, Window NT software, IG-XL Engineering and Production Test Software, 1 GB PC memory. (was 512 MB PC memory), PC GBIP Interface Board, National Instruments parallel interface board (for multi-site testing), IT-022-00 208V, 50A Power Input, Options: IT-000-00 Intest System Manipulator, IT0013-00 K-Dock System @ sort (std Intest Handler I/F for final test), Additional DUT Power Supplies (8 per board, rated @ 1A, 10V) ,2 additional sets of DPS = 24 total, scan license. (1) TERADYNE microFLEX tester (only this model). As-is or Refurbished / Warranty. (1) TERADYNE TS124 LH test station (only this model). As-is OR Refurbished/Warranty. Budget: $125,000.00 (1) TESEC 881-TT/A Tester. (6) THERMO KEYTEK Mk2 tester. Will also consider the Zapmaster 7/4 256 pins. As-is or Refurbished / Warranty. Budget: around $250,000. (1) THERMONICS T 2500E or T 2420B Precision Temperature Forcing System for 8" wafer, refurbished / warranty. Budget: $3,000.00 (1) THERMOTEK (or similar) ESD machine that can do HBM, MM and CDM and also Latch up for a 128 pin (must). Would consider ZapMaster 7/2. 7/3 or 7/4 with MM, CDM and LUp options or equivalent. Prefer refurbished but will accept As-is, Budget is up to $100,000. (1)
Any small handler that has a kit for SSOP 209 package. As is or refurbished. (1) ASECO S-130 Change Kits and Contractor Assemblies. (1) DAYMARC 830 or better handler. (1) MULTITEST MT 9320 or 9308 Handler. (1) MULTITEST MT 9510 Handler, any kit. (2) RASCO SO 1800, SO 2000, and SO 2800. (1) SEIKO / EPSON HM 3500 Pick & Place Handlers. (1) SEIKO / EPSON NS 6000 or 6040 handler. (1) SEIKO / EPSON NS 7000 handler. (1) SYM-TEK 600 Handler (only this model). For testing DIP packages, Plastic, Cerdip, Side Brazed, etc. Room, Hot, Cold Temp. Refurbished/Warranty. (1) SYNAX 141C tri-temp handler (this model only). Refurbished/Warranty. Budget: $10,000-$15,000. (1) TESEC 8701TH handler, refurbished with warranty. (1)
APPLIED MATERIALS 9500xR High Current Implanter, must be serial number 150 or higher (due to needed upgrades). (1) APPLIED MATERIALS Quantum 2 Implanter. (1) APPLIED MATERIALS xR 120 implanter. (1) EATON NOVA / AXCELIS GSD 200 High Current Implanter. (1) EATON NOVA / AXCELIS GSD 200E High Current Implanter. (1) EATON NOVA / AXCELIS GSD 200E2 180 KEV or 90 KEV high current implanter, prefer 6" but will accept 8", warranty is a plus. (1) EATON NOVA / AXCELIS GSD 200E2 High Current Implanter. (0) EATON NOVA / AXCELIS GSD 200E2 High Current Implanter with capability to implant the hydrogen ion. (1) EATON NOVA / AXCELIS GSD / HE Implanter, 6" or 8". (1) EATON NOVA / AXCELIS GSD+ High Current Implanter. (1) EATON NOVA / AXCELIS NV 6200 AV Medium Current Implanter, interested in it for parts, serial number should be 700 or higher. (1) Medium Current Implanter for R&D: 200Kev, (10)15/cm3, Substrate temp: 400°C, 6", Budget is $400,000. (1) VARIAN 300XP Medium Current Ion Implanter, good condition. Budget is $100,000. (1) VARIAN 400-10 High Energy ion implanter with Wayflow end station. 4". (1) VARIAN E500HPi Medium Current Implanter. (1) VARIAN EHP500 Medium Current Implanter. (1) VARIAN or EATON NOVA ion implanters (any model) to replace a CF 3000. It should be in good working condition, about 10 years old and can be convert to implant 4" wafer. As, P and B source. Refurbished / Warranty. Budget: $300,000.00 (1) VARIAN Viision 200 series High Current Implanter. (1) VARIAN Viision 80 series High Current Implanter. (2)
72" lab workstations or tables. (1) ADVANCED INSTRUMENTS 3MO Osmometer, budget is $300. (2) ANDERSON PRODUCTS AN47i or AN47ix Anprolene low temperature ethylene oxide benchtop sterilization system. APPLIED BIOSYSTEMS 3100 OR 3130 4-cap sequencer from End user company / lab. (1) BROOKFIELD HBT viscometer with digital or analog spindles. (1) BUEHLER Simplimet 1000 mounting press. (1) BUEHLER Simplimet hot mount press, as is or refurbished / warranty. Will consider alternate /equivalent models. (1) BYK Haze-Gard Plus (this model only). Refurbished/Warranty. Budget: $10,000 - $15,000. (1) CMS INSTRUMENTS micro scratch tester. As-is OR Refurbished/Warranty. (1) DELTA F moisture analyzers, need to read 0 ppb for all moisture and O2 analyzers, refurbished and fully calibrated. (2) DELTA F nanotrace oxygen analyzer. (1) Electrobalance that can read in the um range (want to weigh filters and metals), operational. (1) GAMRY INSTRUMENTS or similar Galvanostat / Potentiostat control and measuring device. (1) GATAN 656 Dimple grinder. (1) HEWLETT-PACKARD 5971/2/3/5 Mass Spectrometer. Budget dependent upon model number and condition. (1) HEWLETT-PACKARD 6890A/N Gas Chromatographs - All options; all conditions, Budget is $5000-$8000. (1) INSTRON 4303 strain gauge sensor (only this model). Cat N:2630-030 Travel 2.5mm, Gauge length 25mm, type static, code value 448, As-is or Refurbished/Warranty. (5) INSTRON 5562 tensile tester in good working condition. (1) MALVERN particle size anaylzer, such as Mastersizer 2000, Mastersizer 2000E, Micromastersizer etc. Will be using the device to measure particles mainly in the 0.5-80 microns range, MUST be in good working condition. (1) MARKET FORGE STERILMATIC STME Autoclave, budget is negotiable. (2) MEECO moisture analyzers, need to read 0 ppb for all moisture and O2 analyzers, refurbished and fully calibrated. (2) MEECO Tracer or Tracer 2 or AMETEK 5900, 5910 or 5920. (1) MENSOR 600 pressure test system. (1) MET ONE CNC, 1104-10 condensation nucleus counter. (1) Metro carts with wheels: 24x24, 2 or 3 shelves. (2) PARR reactor with pressure and temperature control, 50 to 100 ml, As-is or Refurbished/Warranty. (1) SENSORS UNLIMITED SU640 or SU320 InGaAs near infrared video camera to be used in R&D lab. (1) TA INSTRUMENTS 2980 8mm single / dual cantilever clamps, as is or refurbished. (1) UNHOLTZ / DICKIE Shaker Unit. (1) Workbenches: 30x48 ESD tops, Blue trim with gray or cream color bench tops. Currently using Workstation Industry,
